Multi Touch Panel PC, Product category

MBP-32T0-BC : 4th Gen Intel ULV i3 4010U / i5 4300U/ BDW i7 5650U processor

• Fanless solution and compact housing
• 4Th Gen Intel ULV i3 4010U / i5 4300U / BDW i7 5650U
• DDR III L So DIMM memory up to 8GB
• 2 x 10/100/1000 Mbps Ethernet
• 2 x RS232 , 2 x USB 2.0 , 2 x USB 3.0, 1 x VGA , 1 x HDMI ,1 x Mini PCI e slot
• Supports one 2.5” SATA SSD/HDD (or mSATA)
• 12V/19V/24V DC-In with terminal block
• 2 x Mini PCI e slot for fieldbus modules and Wi-Fi, 3.5G/4G LTE module

 

 

 

   Our embedded PCs are designed to meet the requirement from Controllers, thin clients and other appliance users. Our embedded PCs are easy to install & maintain, with an industrious design to fulfill fanless applications. Which are supplied by 4Th Gen Intel ULV i3 4010U / i5 4300U/ BDW i7 5650U processor with rich I/O connectivity to meet variety of application demands. Kingdy’’s box PC is an off-the-shelf product made for those who are anxious for embedded solutions.

 

  Set out to meet the critical demands of almost any rugged environment, the MBP-32T0-BC Box PC with 12V/19V/24V DC-In is specifically designed to be operating temperature ranging from -10C ~ +40°C .Which is also a field controller designed for remote management application. equipped with low power consumption processor, the features high reliability and expansion capability. This controller has a compact mechanism design and adopts compact design solution to fit in any space-limited environment., is ideally suited for use in applications like unmanned room, factory automation, industrial machine and more.. The users can benefit from wall mount bracket installation.


   To increase the flexibility of embedded solutions within limited space for factory automation , Kingdy’ newly multiple compact PC based box PCs solutions have high integration ability with more Mini-PCI e interfaces which make it a reliable connection with devices in factory automation applications (with optional PROFIBUS, ProfiNET,  DeviceNET,  EtherCAT, EtherNet/IP, CANopen, SERCOSIII master module), IoT applications (with optional GbE LAN, Wi-Fi, 3.5G/4G LTE module) and communication applications (with optional GPIO, RS232/422/485) which is definitely the top choice for M2M intelligent system as a factory automation controller and gateway. 

 

    Kingdy also offers multi selections for different LCD monitors solutions :Aluminum Bezel Monitor ,Full IP65 MonitorVandal Proof LCD Monitor and other LCD monitors too. They can connect to all Kingdy different Box PCs via VGA, DVI as well as HDMI ports for different applications.

 

 

 
MBP-32T0-BC
 
Cubic box PC with 2 external antennas

MBP-32T0-BC

2 external antennas at the rear 


 

MBP-32T0-BC
MBP-32T0-BC
MBP-32T0-BC
Connector for external antenna Power terminal block I/O ports are located at the rear



MBP-32T0-BC
MBP-32T0-BC
MBP-32T0-BC
I/O ports are located at the rear
I/O ports are located at the front side
 
 Cubic Box PC with Multiple Fieldbus Housing 

•  Fanless solution and compact housing 

•  4Th Gen Intel ULV i3 4010U / i5 4300U/ BDW i7 5650U processor 

•  DDR III L So DIMM memory up to 8GB 

•  2 x 10/100/1000 Mbps Ethernet 

•  2 x RS232 , 2 x USB 2.0 , 2 x USB 3.0, 1 x VGA , 1 x HDMI ,1 x Mini PCI e slot

•  Supports one 2.5” SATA SSD/HDD (or mSATA) 

•  12V/19V/24V DC-In with terminal block 

•  8 x DIO (optional) 

•  2 x external antenna (optional) 

•  Audio (optional)

•  Mini PCI e slot for fieldbus modules and Wi-Fi, 3.5G/4G LTE module

System
CPU Intel Core i3 4010U / i5 4300U/ BDW i7 5650U Processor
Memory 1 x 204Pin DDR III L So-DIMM up to 8GB
H/W Monitor
Watchdog Timer 256-Level Watchdog Timer
Display
VGA 1X VGA up to 1920 x 1600
HDMI 1X HDMI up to 1920 x 1080
I/O Ports
USB 2 x USB 3.0 , 2 x USB 2.0 ( rear )
RS232 2 ( front )
LAN

1 x Intel® I218-LM GbE LAN PHY

1 x Intel® I210-AT GbE LAN

Storage
Storage 1 x SATA 2.0 2.5” HDD/SSD
Expansion
Mini-PCIe 2 (one w/ mSATA)
Power Requirement
Power Input Voltage 12/19/24V DC-In with terminal block
Mechanical & Environmental
Operation Temp -10 ~ 40°C
Operation Humidity 10 ~ 90%, non-condensing
Storage Humidity 10 ~ 90%, non-condensing
Mount Wall mount / VESA mount / DIN Rail
Construction Aluminum + steel
Dimension ( L X W X H)mm 167 x 111 x 50
Weight 1.5 kg
Optional
GPIO 8-bits ( 4 x GPI , 4 x GPO)
RS232

1 x RS232/RS422/RS485,1 x RS232

External antenna 1 or 2
USB 1
Audio 1 x Line out , 1 x MIC in
PROFIBUS 1
ProfiNET 1
DeviceNET 1
EtherCAT 1
EtherNet/IP 1
CANopen 1
SERCOSIII 1

 

CANOpen

General

Model Number

26D2CA

Power Consumption

Typical : +5V @ 400mA

Certifications

CE, FCC class A

Dimensions

Module: 51 x 30 x 12.4mm (2" x 1.18" x 0.49") 

I/O Plate: 81 x 19.4 x 41mm (3.19" x 0.76" x 1.61")

Bus Type

PCI Express Mini Card Revision 1.2

Connectors

2x Male DB9

Speed

1Mbps

Protocol

CAN 2.0 A/B

Signal Support

CAN_H, CAN_L

Termination Resistor

120 Ohm (selected by jumper)

Protection

Surge Protection

1,000 VDC

Isolation Protection

2,500 V

ESD Protection

15 kV

EFT Protection

2,500 V

Environment

 

Operating Temperature

-20 ~ 60°C (-4 ~ 140°F)

Storage Temperature

-40 ~ 85°C ( -40 ~ 185°F)

Operating Humidity

5-95% RH, non-condensing

Communications

CAN Controller

NXP SJA-1000

CAN Transceiver

NXP 82C251

Protocol

CAN 2.0 A/B

Signal Support

CAN_H, CAN_L

Speed

1Mbps

CAN Frequency

16MHz

Termination Resistor

120 Ohm (selected by jumper)

Software

CAN Bus Driver

Windows 2000/XP/Vista/7, Windows CE 5/6,Linux Ubuntu 12.10, QNX 6.5

CANopen Software

Windows 2000/XP/Vista/7, Windows CE 5/6

 

 

 

 

PROFIBUS

PROFINET

POWERLINK

Sercos III

EtherNet/IP

EtherCAT

General

Model

Number

Master

26D1DB-MAE

26R2PN-MAE

/

26R2S3-MAE

26R2EI-MAE

26R2EC-MAE

Slave

26D1DB-SAE

26R2PN-SAE

26R2PL-SAE

26R2S3-SAE

26R2EI-SAE

26R2EC-SAE

Power Consumption

Typical : +3.3 V @ 650mA

Certifications

CE, UL

Dimensions

Module: 51 x 30 x 12.4 mm

I/O Plate: 81 x 19.4 x 41mm

I/O Plate: 81 x 19.4 x 45 mm

Bus Type

PCI Express Mini Card Revision 1.2

Connectors

1 x Female DB9

2 x Female RJ45

Communications

Protocol 

PROFIBUS

PROFINET

POWERLINK

Sercos III

EtherNet/IP

EtherCAT

Controller

Hilscher netX100

Displays

SYS, System status LED

Signal interface

Iso. RS-485, RxD/TxD-P, RxD/TxD-N

Isolation 10BASE-T/100BASE-TX

Speed

9.6 kbps ~

12 Mbps

100 Mbps, 10 Mbps (depending on loaded firmware)

Environment

Operating Temperature

0 ~ 70 °C (32 ~ 140 °F), w/ Air flow during

measurement: 0,5 m/s

Storage Temperature

0 ~ 70 °C (32 ~ 185 °F)

Operating Humidity

10-95% RH, non-condensing

Software

OS Device

Windows 2000/XP/Vista/7/8 (32/64-bit)

Utility

SYCON.net

No.

Name
Download

1

MBP-32T0-BC Data Sheet

2

Industrial Fieldbus Module Datasheet

3

Industrial Fieldbus Module Datasheet

4

MBP-32T0-BC high-definition product photo download

5

Warranty / RMA Service Policy & RMA Application Form download

Subject: Request for quotation/information on MBP-32T0-BC (4th i3 4010U / i5 4300U/ BDW i7 5650U) series

Requested Model Number (Please refer to “Specification” for details of each model number) :

Personal Contact Information: (Fields marked with an asterisk (*) are required)

Family Name: * Given Name: * Salutation: Mr Mrs Miss * Company: * Company Type: System Integrator   Agent   Distributor   Trading   Others Email: * MSN/Skype: Tel: Country: Description:

From where you know us:

Search Engine: Google
Search Engine: Yahoo
Search Engine Other:
Trade show:
Friend, client or supplier
Others
Submit